Reviewing A Recording - Canon XF300 Instruction Manual

Reviewing a Recording

When the camcorder is in
was recorded.
Operating modes:
1 Open the [Rec Review] submenu to set the review length.
[J Other Functions]
2 Select the desired option and then press SET.
3 After you finish recording, press the
• The last clip that was recorded is played back without audio for the
selected duration. [A REVIEW] appears at the top of the screen.
• Press the CANCEL button to stop reviewing the clip and change the
camcorder back to record pause mode.
• After the clip finishes playing back, the camcorder returns to record
pause mode.
Options
[Entire Clip]: Allows you to review the entire clip.
[Last 4 sec]: Allows you to review just the last 4 seconds of the clip.
NOTES
• When you are using a special recording mode (0 104), you cannot
review a clip.
• If the camcorder switched CF cards during a recording, the camcorder
will play back the clip on the CF card most recently recorded on.
Downloaded From VideoCamera-Manual.com Manuals
mode, you can review the last clip that
[Rec Review]
U
button.
Recording
Reviewing a Recording
[J Other Functions]
[ Rec Review]
[Entire Clip]
3
103