Embedding Custom Picture Settings In A Recording - Canon XF300 Instruction Manual

4
[H X Transfer File]
[Copy To Cam.]
[H X Transfer File]
[Load From Cam.]
[J Other Functions]
[Add X File]
118
Downloaded From VideoCamera-Manual.com Manuals
Custom Picture Settings
Customization
Copying a File from an SD Card to the Camcorder
1 After selecting a file on the SD card, open the [Copy To Cam.]
submenu.
[H X Transfer File]
2 Select the file slot under which to save the file and then press SET.
3 Select [OK] and then press SET.
• The currently selected file will be copied to the selected slot on the
4 Press the CUSTOM PICT. button to exit the custom picture menu.
Replacing a File on an SD Card with a File in the Camcorder
1 After selecting a file on the SD card to replace, open the [Load From
Cam.] submenu.
[H X Transfer File]
2 Select the file to transfer to the SD card and then press SET.
3 Select [OK] and then press SET.
• The file on the SD card will be overwritten by the one on the
4 Press the CUSTOM PICT. button to exit the custom picture menu.
• You can also copy a custom picture file embedded in a clip to the
camcorder (0 141).

Embedding Custom Picture Settings in a Recording

You can record video or take a photo with your custom picture settings
applied to it. Later, those embedded settings in the video or photo can be
copied to the camcorder (0 166) and be applied to future recordings.
You may find that embedding custom picture settings in a recording helps
you keep track of them, such as verifying what settings were used for a
particular recording.
1 Open the [Add X File] submenu.
[J Other Functions]
2 Select [To Clip] or [To Photo] and then press SET.
• Selecting [To Clip] will embed the custom picture file in a clip while
3 Select [On] and then press SET.
[Copy To Cam.]
camcorder, overwriting the file in that slot.
[Load From Cam.]
camcorder.
NOTES
[Add X File]
selecting [To Photo] will embed the file in a photo.