Setup menu 2 ( Á )
Quick view
If you enable Quick View before capturing an image, you can view the
image you just captured on the LCD monitor for the duration set in the
[Quick View] setup. Quick view is possible only
with still images.
- Sub menus
[Off]
: The quick view function
can't be activated.
[0.5, 1, 3 sec]
: The captured image is
briefl y displayed during
the selected time.
Downloaded From camera-usermanual.com Samsung Manuals
54
_SETUP
Auto power off
This function switches the camera off after a set amount of time in order
to prevent unnecessary battery drainage.
- Sub menus
[Off]
[1, 3, 5, 10 min] : The power will turn off
SETUP 2
Quick View
Off
Power Off
0.5 sec
LCD Save
1 sec
Video Out
3 sec
- After replacing the battery, the power off setting will be preserved.
Format
Reset
- Note that the automatic power off function will not operate if the
Back
OK
Set
camera is in the PC / Printer mode, slide show, playing back a voice
recording and playing back a movie clip.
LCD save
If you set the [LCD save] to On and the camera isn't operated during the
specifi ed time, the LCD monitor will be turned off automatically.
- Sub menus
[Off]
[On]
: The power off function will
not operate.
automatically if not used
for the period of time
specifi ed.
: The LCD monitor will not be
turned off.
: If the camera isn't operated dur-
ing the specifi ed time (about 30
SEC.), the camera power will be
idle (Camera status lamp:Blinking)
automatically.
SETUP 2
Quick View
Power Off
Off
LCD Save
1 min
3 min
Video Out
Format
5 min
Reset
10 min
Back
OK
Set
SETUP 2
Quick View
Power Off
LCD Save
Off
Video Out
On
Format
Reset
Back
OK
Set