Setup 2; Quick View; Auto Power Off; Lcd Save - Samsung S1050 User Manual

[ Quick view ]
• If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the durationset in the [Quick View]
setup. Quick view is possible only with still images.
• Sub menus
[Off] : The quick view function can't be
activated.
[0.5, 1,3 sec]: The captured image is briefly
displayed during the selected time.
[ Auto power off ]
• This function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
• Sub menus
[Oft] :The power oft function will not operate.
[1,3, 5, 10 rain] :The power will turn oft
automatically if not used for the
period of time specified.
- After replacing the battery, the power eft setting
will be preserved,
- Note that the automatic power off function will not operate if the camera is in
PC / Printer mode, slide show, playing back a voice recording,playing back a
movie clip.
[ LCD save ]
• If you set the [LCD save] to On and the camera isn't operated duringthe
specified time, the LCD monitor will be tumed off automatically.
• [LCD save] sub menu
[Oft]:The LCD monitor will not be tumed off.
[On]: If yeu select the [LCD Save] and the camera
isn't operatedduring the specified time(about
30 SEC.), the camera power will be idle(LCD
monitor : OFF, Camera sbatuslamp :
Blinking) automatically.To use the camera
again, pressany of the camera buttons
except the power button.
(36_