Metering; Drive Mode - Samsung S85 User Manual

Metering

If you cannot obtain suitable exposure conditions, you can change the
metering method to take brighter pictures.
[Multi] : Exposure will be calculated based
on an average of the available light
in the image area. However, the
calculation will be biased towards
the centre of the image area. This is
suitable for general use.
[Spot] : Only the rectangular area in the
centre of the LCD monitor will be metered for light. This is
suitable when the subject in the centre is exposed correctly,
regardless of the back lighting.
[Center] : Exposure will be calculated based on an average of the avail-
able light in the image area. However, the calculation will be
biased towards the centre of the image area. This is suitable
for taking a picture of small object like a fl ower or insects.
Ä If the subject is not the centre of the focus area, do not use the spot
metering as this may result in an exposure error. In this circumstance,
it is better to use exposure compensation.
Downloaded From camera-usermanual.com Samsung Manuals
40 _RECORDING

Drive mode

You can select continuous shot, and AEB (Auto Exposure
Bracketing).
[Single]
[Continuous]
[Motion Capture] : This takes 7 shots per
METERING
Multi
[AEB]
[Wise Shot]
: Take one picture only.
: Images will be taken con-
tinuously until the shutter
button is released.
second, when the shutter is
pressed and held down. After completing the continuous
shooting, images are saved and the images play back on
the Rear LCD. The maximum number of shots is 30 and
the image size is fi xed as VGA.
: Take three pictures in a series in different exposures:
short exposure (-1/3EV), standard exposure (0.0EV),
and over exposure (+1/3EV).
: Two images are taken at a time. One is taken in the Fill-In
Flash mode and the other is taken in the ASR mode.
DRIVE
Single