Set And Enter Pin Code; Activate The Pin Code System; Deactivate The Pin Code System; Enter The Pin Code - Bang & Olufsen BeoSound 3000 2671 Service Manual

Important

Set and enter PIN code

Activate the PIN code system

Enter the PIN code

Deactivate the PIN code system

When the product is reconnected to mains, wait 20-30 sec. before operating.
All adresses in ML has to be updated after disconnecting mains voltage.
It is your own choice whether or not to activate the PIN code system. However, if
you choose to activate the system, your BeoSound 3000 is protected against theft
with a four-digit PIN code.
The use of a PIN code means that if your BeoSound 3000 is disconnected from the
mains for more than 15-30 minutes, the system can only be activated again by
keying in your own personal PIN code.
If the PIN code is not entered, the BeoSound 3000 automatically switches to
standby after 3 minutes.
If a wrong PIN code is entered, you get fi ve attempts to key in the code, after
which the system is switched off and cannot be switched on for 3 hours.
Should you forget your PIN code, please contact a retailer who can assist you in
receiving a Master code from Bang & Olufsen. You need the Master code to
reactivate your BeoSound 3000.
The PIN code system is easily activated, and you choose the four-digit code yourself.
l l
Press STOP to key in a four-digit PIN code of your own choice.
NEW PIN appears briefl y, and PIN _ _ _ _ appears.
Key in a four-digit PIN code of your own choice.
The PIN code is not displayed.
Press PLAY to store the PIN code.
CONFIRM appears briefl y, and PIN _ _ _ _ appears. Re-enter your code. The PIN
code is not displayed. Press PLAY to store.
STORED appears, indicating that your PIN code is stored.
If the PIN code system is activated and your BeoSound 3000 is disconnected from
the mains for more than 15-30 minutes, you are requested to key in the four-digit
PIN code when the system is fi rst switched on. The cue PIN _ _ _ _ is displayed.
Key in your personal PIN code. The PIN code is not displayed. When the four-digit
code has been entered, the display returns to the relevant source e.g. RADIO 1.
You can deactivate the PIN code system at any time. All you need is to enter your
PIN code fi rst and then deactivate the system.
l l
Press STOP to key in the four-digit PIN code.
PIN _ _ _ _ appears. Key in your personal four-digit PIN code.
The PIN code is not displayed. NEW PIN ? appears.
m p
Press to switch the display. PIN OFF appears.
Press PLAY to deactivate the PIN code system.
DELETED appears, indicating that the PIN code system is deactivated.
Service- and pin code, English 5.17