Replacement Of Cd-Mechanism - Bang & Olufsen BeoSound 3000 2671 Service Manual

5.10 Repair tips, English

Replacement of CD-mechanism

- Open the glass doors.
- Disconnect the main voltage.
- Dismount the glass doors by pulling forward at the bottom fi rst and then at the top.
Take care that the glass door does not scratch the display.
- Remove the seven screws A in the back cover. Pull out the back cover by wrenching
the corners C of the back cover to the side.
- Dismount the two side front covers by pulling them carefully outwards at the top
and bottom until a loud click is heard.
- Click off the CD-front cover.
- Remove the front panel by unscrewing the eight screws E.
- The complete CD-mechanism with CD-servo/decoder PCB can now be lifted out
forwards by removing the four screws.
- Dismount the plugs connecting CD-servo/decoder PCB to the CD-interface-PCB
and the CD-mechanism with CD-servo/decoder PCB can now be replaced.
E
E
E
E
E
E
E
E