Removal Of Gearbox For Cd-Clamp - Bang & Olufsen BeoSound 3000 2671 Service Manual

Removal of gearbox for CD-clamp

The product must not be connected to the mains when dismantling.
- The clamp must be electrically sealed.
- Lift up the clamp manually.
- Dismount the spring R at its bottom most point.
- Dismount the lead to the motor, plug 9P78.
- Loosen the screw S and take out the gearbox.
Make sure that the two parts of the fi tting at the top of the arm Q are pressed
completely together when reassembling; then tighten the fi tting.
Q
R
P78
9
S
Repair tips, English 5.11