Section 5 Component Teardown - Electrolux FPRH17D7KF All Refrigerator Professional Series Servicing

Component Teardown
This section explains how to access and remove components from an All Refrigerator Pro and/or an All Freezer Pro
unit, and has been arranged in such a way as to simulate which components would need to be removed first in
order to gain access to other components. When following a component removal procedure, it may be necessary to
reference another component removal procedure listed earlier in this section.
IMPORTANT
Before continuing, please take note of the WARNINGS and CAUTIONS below.
WARNING
- If it is necessary to remove an All Refrigerator Pro and/or an All Freezer Pro unit from its
installation, use proper lifting techniques as units are heavy and could fall resulting in serious injury
or death. Pulling a unit from its installation should only be performed by a trained authorized
service technician or installer.
- To avoid electric shock, power to an All Refrigerator Pro and/or an All Freezer Pro unit must be
disconnected whenever accessing/ removing components powered by electricity or components
near other electrical components.
- After service is completed, be sure all safety-grounding circuits are complete, all electrical
connections are secure, and all access panels are in place.
- If unit was used prior to service, the compressor assembly will be hot. Wear protective gloves and
the appropriate safety gear when working with compressors.
- If removing a door from a unit, remember that the doors are heavy. If a door were to fall, it could
cause serious personal injury.
CAUTION
- Metal edges may be sharp. Use caution and wear appropriate safety equipment when servicing
evaporators and condensers to avoid personal injury.
- If working in the compressor area, remember that compressor and tubing may be hot.

Section 5 Component Teardown

5-1