Removing A 5 1 / 4 " Operator-Controllable Drive - Fujitsu AMILO Operating Instructions Manual

Removing a 5
► Open the casing (see
Removing Removingan operator-controllable
► Remove the front panel from the casing (see
(AMILO Desktop L/P)", Page
► Remove all connected cables (data cable, power supply) from the drive.
2
► Loosen the screws (1).
► From the rear, push the drive out of the installation slot in the direction of the arrow (2).
► If you are not installing a new drive, fix the plate in place to cover the drive slot.
► Replace the front panel on the casing (see
(AMILO Desktop L/P)", Page
► Close the casing (see
AMILO Desktop Operating Manual, edition 3
/ " operator-controllable drive
1
4
"Opening the casing", Page
37).
1
1
2
38).
"Closing the casing", Page
33).
"Removing the front panel
"Fastening the front panel
35).
System expansions
47