Monitor Remains Blank; No Mouse Pointer Displayed On The Screen - Fujitsu AMILO Operating Instructions Manual

Monitor remains blank

Cause
Monitor is switched off.
Power saving has been activated (screen is
blank)
Brightness control is set to dark
Power cable not connected
Monitor cable not connected

No mouse pointer displayed on the screen

Cause
The mouse is not correctly connected.
AMILO Desktop Operating Manual, edition 3
Problem solutions and tips
Remedy
► Switch your monitor on.
► Press any key on the keyboard.
or
► Deactivate the screen saver. If
necessary, enter the appropriate
password.
► Adjust the brightness control. For detailed
information, please refer to the operating
manual supplied with your monitor.
► Switch off the monitor and the device.
► Check that the monitor power cable is
properly connected to the monitor and to
a grounded mains outlet or to the monitor
socket of the device.
► Check that the device power cable is
properly plugged into the device and a
grounded mains outlet.
► Switch on the monitor and the device.
► Switch off the monitor and the device.
► Check that the monitor cable is properly
connected to the device and monitor.
► Switch on the monitor and the device.
Troubleshooting
► Shut down the operating system properly.
► Switch the device off.
► Check that the mouse cable is properly
connected to the system unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.
► Make sure that only one mouse is
connected.
► Switch the device on.
29