Konftel 300 Application Notes page 6

3.1.3. Configure Avaya Stations
Use the add station <x> command to allocate a stations for Avaya Telephones where <x> is the
extension for the each of the units as shown in Table 1.
Parameter
Type
Name
Security Code
add station 1
Extension: 38001
Type: 4610
Port: S00009
Name: extn 38001
STATION OPTIONS
Loss Group: 19
Speakerphone: 2-way
Display Language: english
Survivable GK Node Name:
Survivable COR: internal
Survivable Trunk Dest? y
3.1.4. Configure Access to Extended Features
Use the change feature-access-codes command to assign unused feature codes to those features
used by the Konftel 300 as shown in the following Table 5. Note the "*7" entry for the dial plan
shown in Figure 3 is used by these entries.
Parameter
Last number dialed
Access Code (p. 2)
Send All Calls
Activation (p. 3)
Send All Calls
Deactivation (p. 3)
MRR; Reviewed:
SPOC 5/1/2008
Enter the type of station to be configured.
Enter the name of the user which is to be associated with the phone.
Enter a security code, which the telephone can use for authorization.
Table 4: Configuration Konftel Station
STATION
Lock Messages? n
Security Code: XXXXX
Coverage Path 1: 99
Coverage Path 2:
Hunt-to Station:
Personalized Ringing Pattern: 1
Figure 5: Konftel Station Form
This is required to allow the Konftel to redial the last number.
This is required to activate coverage.
This is required to deactivate coverage.
Table 5: Parameters for the Feature Access Codes
Solution & Interoperability Test Lab Application Notes
©2008 Avaya Inc. All Rights Reserved.
Usage
Page
Time of Day Lock Table:
Message Lamp Ext: 38001
Mute Button Enabled? y
Media Complex Ext:
IP SoftPhone? n
Customizable Labels? y
Usage
1 of 5
BCC: 0
TN: 1
COR: 1
COS: 1
konftel300-CM
6 of 10