Konftel 300 Application Notes page 3

The Konftel 300 has a keypad/display, as shown in Figure 2.
Hold
The "Hold" key alternately blocks/unblocks audio signals in both directions, but the Konftel 300
does not send an indication to Avaya Communication Manager that the "hold" key has been
depressed. Consequently, the "hold" key cannot be used to initiate transfer/conference
operations. The "off-hook/flash" key must be used for this purpose, in the same manner as the
"flash" key is used for Avaya analog telephones: when the Konftel is in the "off hook" state,
depression of the "off-hook/flash" key causes the Konftel 300 to send a "flash" signal to Avaya
Communication Manager.
The following table contains additional information about each of the telephone endpoints
depicted in the System Configuration diagram:
Phone
A
B
C
D
E
MRR; Reviewed:
SPOC 5/1/2008
Figure 2: Konftel 300 Keypad /Display
Ext PSTN Number
30201 069 9073 9887 30201
38001
30094
38002
069 7505 6174
30000
Table 1: Extensions Used for Testing
Solution & Interoperability Test Lab Application Notes
©2008 Avaya Inc. All Rights Reserved.
Off-Hook / Flash
On-Hook
Line Mode
Endpoint
Konftel 300
Avaya 2420
Avaya 9640 IP
Avaya 4620 IP
PSTN telephone
AUDIX
3 of 10
konftel300-CM