Basic Operation; Overview Of The Remote Control - Sony Trinitron KD-32NX200AUS Operating Instructions Manual

Overview of the remote control

2 3
1
4
5
7
8
q;
qs
qf
qj
qk
ql
wa
% - Mute button
1
Press to mute the TV sound. Press again to restore.
2 VIDEO I/1 - VCR/DVD Standby button
Press to switch off your VCR/DVD player temporarily. Press again to return to
normal operation.
3 TV I/1 - TV Standby button
Press to switch off the TV temporarily. The red standby indicator on the front of the
TV is lit. Press again to return to normal operation.
6
4 - Screen Mode button
Press to change the screen mode. Refer to page 10.
DIGITAL/a - Digital/Analogue mode, TV button
5
In TV mode: Press to switch between digital and analogue mode.
In analogue text, video input mode, TV menu system, INFO menu, EPG and
Channel Index menu: Press to return to normal TV operation.
6 / - Input Select/Text Hold button
9
In TV mode: Press to view signals from equipment connected to the TV sockets.
Refer to page 27 .
qa
In analogue text mode: Press to hold the current page. Refer to page 13.
qd
Numbered buttons
7
In TV mode: Press to select the required channel number. For channel numbers 10
qg
and above, enter the second digit within two seconds.
In analogue text mode: Press to enter the three digital page number. Refer to page 13.
qh
GUIDE - Guide button
8
In digital TV mode: Press to access digital text and interactive services (depending
on availability).
- Previous channel button
9
In analogue TV mode: Press to return to the previous channel watched (provided
that the channel was watched for more than five seconds).
In digital TV mode: Press to remove any interactive prompts from the TV screen.
In digital text mode: Press to cancel a selection/go back a step. Refer to page 12
w;
MODE - Remote control mode selector
q;
This remote control can be programmed to operate the basic functions of most DVD
players and VCRs. Once programmed, press this button repeatedly to select TV,
VCR or DVD mode. Refer to page 28.
•REC - VCR RECORD button
qa
With the remote control in VCR mode: Press to start your VCR's RECORD function
/ - Text button
qs
In digital TV mode: Press to access digital text. Refer to page 12.
In analogue TV mode: Press to access analogue text. Refer to page 13.
INDEX - Channel Index button
qd
In digital TV mode: Press to access the Channel Index menu. Refer to page 14.
qf - EPG button (Electronic Programme Guide)
In digital TV mode: Press to access the Digital EPG. Refer to page 15.
- INFO button
qg
In digital TV mode: Press to access the Info menu. Refer to page 17.
In analogue TV mode: Press to display information such as current channel number
and screen mode. Press again to cancel.
qh OK button
In TV menu system: Press to confirm a selection. Refer to page 20.
In digital TV mode: Press to access the Channel Index menu. Refer to page 14.
In analogue TV mode: Press to access the Programme Index table. Press the V or v button
to highlight an analogue channel. Press the b button to display the chosen channel.
V, v, B and b buttons
qj
In TV menu system: Press to move through the options. Refer to page 20.
Coloured buttons
qk
In digital menu systems: Press to select the options at the bottom of the screen in
the Info, Main, Channel Index and EPG digital menus.
In analogue text mode: Press to use Fastext. Refer to page 13.
ql 2 +/- Volume buttons
Press to increase (+) or decrease (-) the TV volume.
PROG +/- buttons
w;
In TV mode: Press to view the next (+) or previous (-) channel.
In analogue text mode: Press to view the next (+) or previous (-) page. Refer to page 13.
MENU button
wa
Press to access the TV menu system. Refer to page 20.

Basic Operation

7
Basic Operation