Basic Operation; Overview Of The Remote Control - Sony KD-28DX50 U Manual

Basic Operation

Overview of the remote control

1
/
VIDEO
TV
3
DIGITAL
4
6
7
9
q;
qs
qf
qh
qj
ql
8
Basic Operation
1
2
2
/
5
3
4
5
8
6
qa
qd
7
qg
8
qk
9
q;
qa
qs
qd
qf
qg •
qh
qj
qk
ql
VIDEO I/1 - VCR/DVD Standby button
Press to switch off your VCR/DVD player temporarily. Press again to return
to normal operation.
TV I/1 - TV Standby button
Press to switch off the TV temporarily. The red standby indicator on the front
of the TV is lit. Press again to return to normal operation.
- Screen Mode button
Press to change the screen mode. Refer to page 11.
DIGITAL/a - Digital/Analogue mode, TV button
In TV mode: Press to switch between digital and analogue mode.
In analogue text, video input mode, TV menu system, INFO menu, EPG and
Channel Index menu: Press to return to normal TV operation.
/ - Input Select/Text Hold button
In TV mode: Press to view signals from equipment connected to the TV
sockets. Refer to page 28.
In analogue text mode: Press to hold the current page. Refer to page 14.
Numbered buttons
In TV mode: Press to select the required channel number. For channel
numbers 10 and above, enter the second digit within two seconds.
In analogue text mode: Press to enter the three digital page number. Refer
to page 14.
/ - INFO/Text Reveal button
In digital TV mode: Press to access the Info menu. Refer to page 13.
In analogue TV mode: Press to display information such as current channel
number and screen mode.
In analogue text mode: Press to reveal concealed information (e.g. answers
to a quiz). Refer to page 14.
- Previous channel button
In TV mode: Press to return to the previous channel watched (provided that
the channel was watched for more than five seconds).
Coloured buttons
In digital menu systems: Press to select the options at the bottom of the
screen in the Info, Main, Channel Index and EPG digital menus.
In analogue text mode: Press to use Fastext. Refer to page 14.
- EPG button
In digital TV mode: Press to access the Digital Electronic Programme Guide
(EPG). Refer to page 16.
/ - Text button
In digital TV mode: Press to access digital text. Refer to page 13.
In analogue TV mode: Press to access analogue text. Refer to page 14.
V, v, B and b buttons
In TV menu system: Press to move through the options. Refer to page 21.
OK button
In TV menu system: Press to confirm a selection. Refer to page 21.
In digital TV mode: Press to access the Channel Index menu. Refer to
page 15.
In analogue TV mode: Press to access the Programme Index table. Press
the V or v button to highlight an analogue channel. Press the b button to
display the chosen channel.
MENU button
Press to access the TV menu system. Refer to page 21.
REC button
When Mode Selector button is set to 'VCR': Press to begin recording. Refer
to page 29.
Mode Selector button
This remote control can be programmed to operate the basic functions of
most DVD players and VCRs. Once programmed, press this button
repeatedly to select TV, VCR or DVD mode. Refer to page 29.
2 +/- Volume buttons
Press to increase (+) or decrease (-) the TV volume.
PROG +/- buttons
In TV mode: Press to view the next (+) or previous (-) channel.
In analogue text mode: Press to view the next (+) or previous (-) page. Refer
to page 14.
% - Mute button
Press to mute the TV sound. Press again to restore.