Everyday Use - Sony Trinitron KD-32NX200AUS Operating Instructions Manual

Everyday use

4 4
o4
2 +/-
buttons
t
button
DIGITAL/a button
% button TV I/1 button
This section explains the various functions and operations used during everyday
viewing. Most operations can be done using the remote control.
1.
2.
On/Off
button
3.
Additional operations
To
Turn off the TV temporarily
(standby)...
PROG +/-
buttons
Mute the sound...
Switch between analogue and digital
mode...
button
t/
button
Numbered
Change the Screen Mode...
button
Watch pictures from equipment
connected to the TV's front and rear
sockets (video input mode)...
z
button
/
button
Access text services (depending on
availability of service)...
Access the Digital Electronic
Programme Guide (EPG)...
Return to normal TV operation (from
text, video input mode, TV menu
PROG +/-
buttons
system, INFO menu, EPG and
Channel Index menu)...
2 +/-
buttons
Press the On/Off button (labelled !) on the front of the TV to switch
on the TV.
When the TV is in standby mode (the 1 indicator on the TV is lit red),
press the TV I/1 button on the remote control to switch on the TV.
Press the PROG+/- buttons on the TV or press the PROG+/- or
Numbered buttons on the remote control to select a TV channel.
When selecting double digit numbers using the Numbered buttons, enter
the second digit within two seconds.
Press the 2 +/- buttons on the TV or on the remote control to adjust the
volume.
For example, if you wish to view pictures from a DVD player connected to the
socket on the rear of the TV, press the
symbol appears on the TV screen together with the DVD picture.
Please note, most equipment connected to the rear sockets, when activated, will
send a signal to the TV. The TV will automatically display the picture for you.
Basic Operation
Press
TV I/1 on the remote control. When
the TV is in standby mode the 1
indicator on the TV is lit red. Press
again to return to normal TV operation.
% button on the remote control. Press
again to cancel.
DIGITAL/a button.
If the TV is in digital mode an
information banner appears briefly on
screen when you change channels.
If the TV is in analogue mode the
channel number appears in green
lettering when you change channels.
button. Refer to page 10.
t button on the TV or t/
on the remote control repeatedly until
the picture appears. Refer to page 27.
t/
button repeatedly until the 2
/ button on the remote control.
Refer to pages 12 and 13.
button on the remote control.
Refer to page 15.
DIGITAL/a button.
Basic Operation
button
2
9