Connecting An Aerial And Vcr - Sony Trinitron KD-32NX200AUS Operating Instructions Manual

Getting Started
3

Connecting an aerial and VCR

4
Getting Started
Rear of TV
Rear of VCR
V/L/R connectors
Supplied Scart lead
1. Connect your aerial lead to the socket labelled
the TV.
2.
Connect the supplied RF lead from the socket labelled
the TV to the socket labelled IN* on your VCR.
3.
Connect an RF lead from the socket labelled OUT* on your VCR to the
socket labelled
4. Connect the supplied scart lead from the socket labelled i3/r3 on the
rear of the TV to the audio/video sockets labelled TV* on your VCR.
5.
Insert a pre-recorded tape into the VCR and press the 'PLAY' button.
This enables the TV to locate and store the video channel during the
'Automatically tuning the TV' procedure.
Connecting an aerial only
1. Connect your aerial lead to the socket labelled
the TV.
2.
Connect the supplied RF lead from the sockets labelled
ANALOGUE
z
*Socket names may vary depending on make and model of VCR. Refer to your
VCR instruction manual for details.
Supplied RF lead
Y/U/V connectors
on the rear of the TV.
ANALOGUE
on the rear of the TV.
on the rear of
DIGITAL
on the rear of
on the rear of
DIGITAL
and