Connecting An Aerial And Vcr - Sony KD-28DL11U Operating Instructions Manual

3

Connecting an aerial and VCR

Rear of TV.
Supplied RF Lead
Rear of VCR
Rear of TV.
Supplied RF Lead
Connecting a VCR
1.
Connect your aerial lead to the socket labelled
on the rear of the TV.
DIGITAL
2.
Connect an RF lead from the socket labelled
the rear of the TV to the socket labelled IN* on your
VCR.
3. Connect the supplied RF lead from the socket
labelled OUT* on your VCR to the socket labelled
on the rear of the TV.
ANALOGUE
4. Connect a fully wired 21-pin scart lead from the
socket labelled i2/r on the rear of the TV to
socket labelled TV on your VCR**.
5.
Insert a pre-recorded tape into the VCR and press
the 'PLAY' button. This enables the TV to locate
and store the video channel during the
'Automatically tuning the TV' procedure.
z
*Socket names may vary depending on make and model
of VCR. Refer to your VCR instruction manual for details.
**If your VCR does not have a scart socket, follow the
connecting instructions above ignoring the scart lead
connection.
Connecting an aerial only
1. Connect your aerial lead to the socket labelled
on the rear of the TV.
DIGITAL
2. Connect the supplied RF lead from the sockets
labelled and
ANALOGUE
Basic Operation
on
on the rear of the TV.
7
Basic Operation