LED-13
Receiver off hook test fail. One or more phones are off
hook on phone line during test.
LED-14
REN test failed – high REN detected. Too many parallel
phones connected to phone line X
LED-15
Line is active
LED-16
Line inactive
LED-17
During Provisioning Stage*
LED-18
During Firmware Recovery Stage*
LED-19
Line X is registered normally to the sip providers network
and is ready to make a call
*Note: In Provisioning and Firmware Recovery Stage, the power LED is Steady ON.
Internet
ADSL/Cable
Modem Ethernet
FIRMWARE VERSION 1.0.7.3
LAN
HT701/702/704
FIGURE 2: HT70X CONNECTION DIAGRAM
HT70X USER MANUAL
Phone
Phone
Phone
Phone
Internet /
Phone
Internet /
Phone
Phone
Cordless
Phone
FXS
Analog
Fax
4x250ms ON/OFF
+
3sec OFF
5x250ms ON/OFF
+
3sec OFF
500ms ON/OFF
ON
500ms ON/OFF
250ms ON/OFF
2x1000 ms ON/OFF
+
3sec OFF
Page 12 of 52