Available Signals - JVC GD-W192 Instructions Manual

CONTROLS AND FUNCTIONS (cont.)
RGB SETUP
■ H-POSITION : Adjust the horizontal picture position.
■ V-POSITION : Adjust the vertical picture position.
■ CLOCK : Eliminates stripes or flickering by adjusting.
■ PHASE : Eliminates stripes or flickering by adjusting.
■ AUTO ADJUST : Adjust the size and position of picture automatically.
■ POWER SAVING : When no signal in RGB PC input, change to power saving mode at 5s. (POWER LED light to an orange.)
When signal comes in, turn on. (POWER LED light to a green.)
■ AUTO REPEAT : Operate "AUTO ADJUST" automatically, when the input signal source changes.

Available signals

Signal type
NTSC（3.58）
PAL
VGA
VGA TEXT
SVGA
XGA
SXGA
WXGA
640×480p
720×480p
720×576p
1280×720p
1920×1080i
1920×1080p
✓
：Acceptable －：Not acceptable
* Some signals may not be displayed normally even if its frequency is within the acceptable range.
* "NO SIGNAL" is displayed when no signal or not acceptable sinal come in.
Frequency
Horizontal(kHz) Vertical(Hz)
15.734 59.94
15.625 50.0
31.469 59.94
31.469 70.00
35.156 56.251
37.879 60.317
48.363 60.004
60.019 75.024
63.981 60.020
47.712 60.015
－ －
－ －
－ －
－ －
－ －
－ －
1. Press the MENU button to access menu.
2. Use the ▲/▼ button to highlight a selection.
3. Press the ▶ button to choose an item.
4. Use the ▲/▼ button to highlight a selection.
5. Use the ◀ / ▶button to adjust the setting on
a selected item.
Input terminals
VIDEO 1/2 /S-VIDEO
✓
✓
－
－
－
－
－
－
－
－
－
－
－
－
－
－
13
RGB HDMI
－ －
－ －
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓
－
✓
－
✓
－
✓
－
✓
－
✓
－