Connecting To Gas Supply - Desa CF18PV Owner's Operating & Installation Manual

INSTALLING
Continued
16
Figure 13 - Attaching Mounting Brackets to Heater

CONNECTING TO GAS SUPPLY

A qualified service person must connect heater to gas supply.
Follow all local codes.
Never connect heater directly to the propane supply. This heater
requires an external regulator (not supplied). Install the external
regulator between the heater and propane supply.
Installation Items Needed
Before installing heater, make sure you have the items listed below.
• external regulator (supplied by
installer, see page 16)
• piping (check local codes)
• sealant (resistant to LP gas)
• manual shutoff valve *
* An A.G.A. design-certified manual shutoff valve with 1/8" NPT tap is an acceptable
alternative to test gauge connection. Purchase the optional A.G.A. design-certified
manual shutoff valve from your dealer. See Accessories, page 35.
NOTICE
CAUTION
WARNING ICON G 001
• test gauge connection *
• sediment trap
• tee joint
• pipe wrench
Masonry Screw
Mounting
Bracket
102653