Connecting To Gas Supply - Desa Comfort Glow CG2618PV Owner's Operation And Installation Manual

INSTALLING
Continued
101992
Figure 12 - Attaching Mounting Brackets to Heater

CONNECTING TO GAS SUPPLY

A qualified service person must connect heater to gas supply.
Follow all local codes.
Never connect heater directly to the propane/LP supply. This heater
requires an external regulator (not supplied). Install the external
regulator between the heater and propane/LP supply.
Installation Items Needed
Before installing heater, make sure you have the items listed below.
• external regulator (supplied by
installer, see page 16)
• piping (check local codes)
• sealant (resistant to LP gas)
• manual shutoff valve *
* An A.G.A. design-certified manual shutoff valve with 1/8" NPT tap is an acceptable
alternative to test gauge connection. Purchase the optional A.G.A. design-certified manual
shutoff valve from your dealer. See Accessories, page 31.
NOTICE
CAUTION
• test gauge connection *
• sediment trap
• tee joint
• pipe wrench
Masonry Screw
Mounting
Bracket
Continued
15