Optional Parts List - Honda CRF250R Owner's Manual

Optional Parts List

Optional Parts List

These parts and tools may be ordered from your
authorized dealer.
FRAME Remarks
Driven sprocket < >: Drive chain links
49 Teeth, Aluminum.
Standard
<116>
Optional 48 Teeth, Aluminum
50 Teeth, Aluminum
Drive chain D.I.D 520 DMA4/120RB
size/link RK520TXZ/120RJ
Handlebar
lower holder 3 mm (0.1 in) offset
Optional no offset
TOOLS Remarks
Pin spanner A To adjust spring preload.
(two spanners required)
Workstand For maintenance
Air gauge For checking tyre air pressure
158
Technical Information
FRAME Remarks
Shock spring 52 N/mm (297 lbf/in)
Standard
No mark
(factory products)
or
Lime green paint
(aftermarket parts)
Optional 50 N/mm (286 lbf/in)
Softer
Yellow paint
Stiffer 54 N/mm (308 lbf/in)
Brown paint
Fork spring 4.59 N/mm (26.21 lbf/in)
Standard
No mark
(factory products)
or
2 scribe marks
Optional 4.40 N/mm (25.12 lbf/in)
Softer
No mark
Stiffer 4.80 N/mm (27.41 lbf/in)
3 scribe marks
The standard fork spring and shock spring
mounted on the motorcycle when it leaves the
factory are not marked. Before replacing the
springs, be sure to mark them so they can be
distinguished from other optional springs.