Honda CRF250R Owner's Manual page 134

Front Suspension Adjustments
30. Install the handlebar (34), mounting rubbers,
washers and handlebar lower holder nuts (35)
and tighten the handlebar holder nuts to the
specified torque:
44 N·m (4.5 kgf·m, 32 lbf·ft)
(35)
(34) handlebar
(35) mounting rubbers, washers and handlebar lower
holder nuts
31. Install the number plate (page 108).
126
Adjustments for Competition
32. With the front brake applied, pump the fork up
and down several times to seat the axle and
check front brake operation.
(34)
33. While keeping the forks parallel, alternately
tighten the right axle pinch bolts (36) to the
specified torque:
20 N·m (2.0 kgf·m, 15 lbf·ft)
(36)
(36) right axle pinch bolts
NOTICE
To avoid damage when torquing the axle pinch
bolts, be sure the axle is seated firmly onto the left
fork leg clamp inner surface.
34. Install the disc cover (37) and tighten the disc
cover socket bolts (38) to the specified torque:
13 N·m (1.3 kgf·m, 10 Ibf·ft)
(38)
(37)
(37) disc cover
(38) disc cover socket bolts
35. Turn the rebound damping (39) and
compression damping (40) adjuster screws
back to their original settings.
(40)
(39)
(39) rebound damping adjuster
(40) compression damping adjuster