Change Scsi Settings; Select Console; Select Boot Options - IBM p 655 series User Manual

Change SCSI Settings

This option allow you to view and change the addresses of the SCSI controllers attached to your system.
SCSI Utilities
1. Hardware Spin Up Delay
2. Change SCSI Id
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _

Select Console

Note: This option is not available in a partitioned system. A virtual terminal window on the HMC is the
default firmware console for a partitioned system.
The Select Console Utility allows the user to select which console the user would like to use to display the
SMS menus. This selection is only for the SMS menus and does not affect the display used by the
operating system.
Follow the instructions that display on the screen. The firmware will automatically return to the SMS main
menu.

Select Boot Options

Use this menu to view and set various options regarding the installation devices and boot devices.
1. Select Install or Boot a Device
2. Select Boot Devices
3. Multiboot Startup
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Option 1
Select Install or Boot a Device allows you to select a device to boot from or install the operating
system from. This selection is for the current boot only.
Option 2
Select Boot Devices allows you to set the boot list.
Option 3
Multiboot Startup toggles the multiboot startup flag, which controls whether the multiboot menu is
invoked automatically on startup.
58 Eserver pSeries 655 User's Guide
X = eXit System Management Services
X = eXit System Management Services