Etting The Frequency; Tuning With [Dial - Icom IC-7851 Instruction Manual

■ Setting the frequency
The transceiver has several setting methods for conve-
nient frequency setting.
D Tuning with [DIAL]
q
Select the desired band with the band keys.
w
Rotate [MAIN DIAL] to set the desired frequency in
the Main band.
Rotate [SUB DIAL] to set the desired frequency in
the Sub band.
✔ CONVENIENT!
The [SUB DIAL] is always ready to tune the Sub band.
The Sub dial allows you to quickly tune the Sub band
without changing from Main to Sub.
D About the Quick tuning step
The operating frequency can be changed in kHz steps
for quick tuning. The Quick tuning function can be inde-
pendently set for the Main and Sub bands.
• Tuning
q
Push [TS].
• "" is displayed and the Quick tuning function is turned
ON.
w
Rotate [MAIN DIAL].
• The frequency changes in kHz steps.
e
Push [TS] again.
• "" disappears and the Quick tuning function is turned
OFF.
• Selecting the desired "kHz" step
q Push [TS].
• "" is displayed and the Quick tuning function is turned
ON.
w
Hold down [TS] for 1 second.
• The
TS screen is displayed.
e
Push the desired Mode key.
• The operating mode is selected.
r
Rotate [MAIN DIAL] to select a tuning step.
• Selectable tuning steps:
0.1, 1, 5, 9, 10, 12.5, 20, or 25 kHz
• Push [DEF](F) for 1 second to return the tuning step to
the default setting.
e and r to select Quick tuning steps
t
Repeat steps
for other modes, if desired.
y
Push [EXIT/SET] to exit the setting display.
The TS screen can be entered from the Main or Sub
band.
The selected tuning step is used for both the Main
and Sub bands.
Mode keys
TS icon
•
TS screen
4-7
BASIC OPERATION
Band keys
[MAIN DIAL] [SUB DIAL]
[MAIN DIAL] [SUB DIAL]
[EXIT/SET] [TS] MAIN, SUB
TS icon
4