Sony dvp-s3000 Service Manual page 9

6-6. Note on Mounting LM-51 Board
1) Align two bosses. (See Fig.14)
Fix the board securely with screws (PTPWH 2 × 5). (The
2)
sensor will not function normally if the board floats up.)
Screw
(PTPWH2 × 5)
LM-56 board
Fig.14
6-7. Note on Mounting TT-701 Board
1) Align two bosses. (See Fig.15)
2) Align four tabs. (See Fig.15)
Fix the board securely with 3 screws (BV 3 × 10). (The
3)
sensor will not function normally if the board floats up.)
TT-40 board
Two claws
Boss
Two bosses
Three screws
(BV3 × 10)
Boss
Two claws
Fig.15
– 9 –