Sony dvp-s3000 Service Manual page 5

4. NOTE ON MOUNTEING SLED MOTOR
Push the sled motor assy 1 toward direction A. (See Fig.5)
1)
Tighten two screws 2 (M1.7 × 2.5).
2)
1 Sled motor ass'y
2 Two screws (M1.7 × 2.5)
Fig. 5
Raising the MD block assy 3 90 º with the side down.
3)
confirm that the optical pick-up 4 falls by self weight.
(See Fig. 6)
Further, with the front side of MD block assy 3 up, confirm
4)
that the optical pick-up falls by self weight.
Lower
A
3 MD block ass'y
Upper
Front side
4 Optical pick-up
Fig. 6
– 5 –
Front side
Upper
Lower