ADJUSTING THE AIR FLOW
DIRECTION
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button.
• The vertical airflow louvre will swing.
2
Press the SWING button again to
stop the desired position.
MODE
CLEAN
FAN
SWING
Adjustment range
COOL and DRY modes
HORIZONTAL AIR FLOW DIRECTION
Adjust the horizontal air flow direction
with the louvre lever.
CAUTION:
Never attempt to adjust the vertical airflow lou-
vre manually.
• Manual adjustment of the vertical airflow lou-
vre can cause the unit to malfunction.
• When the vertical adjustment louvre is posi-
tioned at the lowest position in the COOL or
DRY mode for an extended period of time,
condensation may result.
1h
1
2
SET/C
HEAT mode
Louvre lever
COANDA AIRFLOW
In cool or dry mode, vertical airflow louvre
is set obliquely upward to deliver cool air
to the ceiling in order to avoid direct air-
flow. In heat mode, vertical airflow louvre
is set downward to deliver the warm air
down to the floor.
1
During operation, press the COAN-
DA AIRFLOW button.
• The remote control will display "
TO CANCEL
Press the COANDA AIRFLOW button
again.
DISPLAY
MODE
FAN
SWING
NOTE:
• If you want COANDA AIRFLOW operation in
FULL POWER mode, press COANDA AIR-
FLOW button during FULL POWER operation.
GB-7
AM
1h
CLEAN
SET/C
".
1