Beep Level; Beep Level Limit - Icom IC-7600 Instruction Manual

10
SET MODE
■ Level set mode (Contnued)

Beep Level

Sets the beep output level from 0% to 100% n 1%
steps. (default: 50%)

Beep Level Limit

Turns the beep tone output level lmtng capabl-
ty ON and OFF for the confrmaton and band edge
beep tones. (default: ON)
When ths tem s set to ON, the beep tones are
lnked to the [AF] control untl rotaton of the [AF]
control reaches to the specfed level—further rota-
ton wll not ncrease the volume of the beep tones.
123
50 %
ON
• OFF : Beep level s lnked to the [AF] control.
• ON : Beep level s lmted wth the [AF] control.