Features Setup Page - MATSONIC ms9147c User Manual

Features Setup Page

This page sets up some parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
OnBoard Serial PortA
OnBoard Serial PortB
Serial Port2 Mode
OnBoard Parallel Port
Parallel Port Mode
Parallel Port IRQ
Parallel Port DMA
OnBoard Game Port
OnBoard MIDI Port
MIDI Port IRQ
OnBoard IDE
Audio Device
Modem Device
Ethernet Device
USB Controller
USB Device Legacy Support
ThumbDrive Support for DOS
OnBoard FDC Use this item to enable or disable the
onboard floppy disk drive interface.
OnBoard Serial Use these items to enable or disable the
PortA/B onboard COM1/2 serial port, and to assign
a port address.
Onboard Use this item to enable or disable the
Parallel Port onboard LPT1 parallel port, and to assign a
port address. The Auto setting will detect
and available address.
Parallel Port Use this item to set the parallel port mode.
Mode You can select SPP (Standard Parallel
Port), ECP (Extended Capabilities Port),
EPP (Enhanced Parallel Port), or ECP +
EPP.
Parallel Port Use this item to assign IRQ to the parallel
port.
IRQ
3: BIOS Setup Utility
Enabled
3F8h/COM1
2F8h/COM2
Normal
378h
SPP
7
N/A
ESC : Quit
201h
Item
300h
F1 : Help
10
Both
F5 : Old Values (Shift)F2 : Color
Enabled
F6 : Load BIOS Defaults
Auto
Enabled
F7 : Load Setup Defaults
Enabled
Disabled
Disabled
↑↓←→ : Select
PU/PD/+/- : Modify
33