Features Setup Page - MATSONIC MS9307C Series User Manual

Features Setup Page

This page sets some of the parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
OnBoard Serial PortA
OnBoard Serial PortB
Serial Port2 Mode
OnBoard Parallel Port
Parallel Port Mode
Parallel Port IRQ
Parallel Port DMA
OnBoard Game Port
OnBoard MIDI Port
MIDI Port IRQ
OnBoard PCI IDE
Audio Device
Modem Device
Ethernet Device
Onboard USB Function
USB Function for DOS
OnBoard FDC
Use this item to enable or disable the onboard
floppy disk drive interface.
OnBoard Serial
Use these items to enable or disable the onboard
PortA/B
COM1/2 serial port, and to assign a port address.
Serial Port2
Use this item to allocate the resources of the
Mode
second serial port. Under Normal, the resources
are allocated to the onboard serial port. Under
ASKIR or IrDA, the resources are allocated to the
onboard IR port.
Onboard Parallel
Use this item to enable or disable the onboard
Port
LPT1 parallel port, and to assign a port address.
The Auto setting will detect and available address.
Parallel Port Mode
Use this item to set the parallel port mode. You
can select SPP (Standard Parallel Port), ECP
(Extended Capabilities Port), EPP (Enhanced
Parallel Port), or ECP + EPP.
Parallel Port IRQ
Use this item to assign either IRQ 5 or 7 to the
parallel port.
3: BIOS Setup Utility
Enabled
3F8h/COM1
2F8h/COM2
Normal
378h
ECP
7
3
ESC : Quit
201h
F1 : Help
300h
10
F5 : Old Values (Shift)F2 : Color
Both
F6 : Load BIOS Defaults
Enabled
Enabled F7 : Load Setup Defaults
Enabled
Enabled
Disabled
: Select Item
PU/PD/+/- : Modify
29