Table of Contents
Advertisement
Mainboard User's Manual
Expansion Slots Installation
This mainboard has four 32-bit PCI (Peripheral Components
Interconnect) expansion slots, one 4xAGP slot, and one CNR slot.
PCI Slots
PCI slots are used to install expansion cards that have the
32-bit PCI interface.
4x AGP Slot
The 4xAGP slot is used to install a graphics adapter that supports
the 4xAGP specification and has a 4xAGP edge connector.
CNR Slot
The Communications Networking Riser (CNR) slot can be used to
insert a CNR card.
CNR Slot
PCI Slot
AGP Slot
1. Remove a blanking plate from the system case
corresponding to the slot you are going to use.
2. Install the edge connector of the expansion card
into the expansion slot. Ensure that the edge
connector is correctly seated in the slot.
3. Secure the metal bracket of the card to the system
case with a screw.
18
Advertisement
Table of Contents
