Standard Cmos Setup Page - MATSONIC ms9147c User Manual

Standard CMOS Setup Page

This page displays a table of items defining basic information
about your system.
AMIBIOS SETUP – STANDARD CMOS SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Date (mm/dd/yy) : Mon Sept 05, 2002
Time (hh/mm/ss) : 17:08:22
Type Size Cyln Head WPcom Sec Mode Mode Mode Mode
Pri Master : Auto
Pri Slave : Auto
Sec Master : Auto
Sec Slave : Auto
Floppy Drive A : 1.44 MB 3 1/2
Floppy Drive B : Not Installed
Month : Jan – Dec
Day : 01 – 31
Year : 1901 – 2099
Date & Time Use these items to set up system date and
time
Use these items to configure devices
IDE Pri Master
Pri Slave connected to the Primary and Secondary IDE
Sec Master channels. To configure an IDE hard disk
Sec Slave drive, choose Auto. If the Auto setting fails to
find a hard disk drive, set it to User, and then
fill in the hard disk characteristics (Size,
Cyls, etc.) manually. If you have a CD-ROM
drive, select the setting CDROM. If you have
an ATAPI device with removable media (e.g.
a ZIP drive or an LS-120), select Floptical.
Floppy Drive A Use these items to set up size and capacity of
the floppy diskette drive(s) installed in the
Floppy Drive B
system.
3: BIOS Setup Utility
LBA Blk PIO 32Bit
On
On
On
On
ESC : Exit
↑↓ : Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color
F3 : Detect All HDD
25