Pioneer MEH-P5000R II Service Manual page 102

MEH-P5000R—,P5000,P5050
- Continuous play
• When you start continuous play with the position which is picked up.
TESTPLAY
RIGHT
SUBQ
ADIP
• When you start continuous play with any address.
TESTPLAY
"F" key in the main unit
ADRS0050
"F" key in the main unit
SUBQ
ADIP
* Pressing "SCR" key in the main unit in each status switches to "TEST STOP" status.
* Pressing " " key in the main unit in the status where you specified the address to start
playing switches the digit of the address that will be changed.
0050H
"
(Initial value)
main unit
ADRS0050
'
* Pressing " " key in the main unit in the status where you specified the address
to start playing switches the digit of the address as shown below.
The first digit
(Initial value)
'
"
main unit
ADRS0050
* Pressing RIGHT/LEFT key in each the status where you specified the address to start playing
switches the value in the digit you selected in the range from 0
* Pressing " ' " key in the main unit in the continuous play status switches to the B-ATT
setting status in the ATT manual tuning.
SUBQ
ADIP
'
" " key in the main unit
HBT
LBT
102
: Continuous play menu
####
: Continuous play (pit part)
####
: Continuous play (groove part)
#### : Address
: Continuous play menu
: Specify the address from which you start playing.
####
: Continuous play (pit part)
####
: Continuous play (groove part)
#### : Address
" key in the
03C0H
ADRS03C0
The second digit
" key in the
ADRS0050
#### : Continuous play (pit part)
#### : Continuous play (groove part)
#### : Address
___
: B-ATT (Focus) setting of high reflection pit part
___
: B-ATT (Focus) setting of low reflection pit part
___ : ATT setting value
" " key in the
0700H
main unit
ADRS0700
The third digit
'
" " key in the
main unit
ADRS0050
" ' " key in the main unit
through F .
H H
" " key in the
08A0H
main unit
ADRS08A0
" " key in the main unit