Pioneer MEH-P5000R II Service Manual page 100

MEH-P5000R—,P5000,P5050
* Pressing "SCR" key in the main unit in each status switches to "TEST STOP" .
* Pressing "F "key in the main unit in each status where a setting value is displayed changes
the digit of the setting value that will be changed.
• When the setting value has two digits.
The first digit
(Initial value)
***
• When the setting value has three digits.
The first digit
(Initial value)
___
***
* Pressing VOL UP/DOWN key in each status where a setting value is displayed changes the value in
the digit you selected in the range from 0
changes in the range from 0
100
"F" key in the
main unit
--
"F" key in the
main unit
The second digit
"F" key in the
main unit
***
through 6 .
H H
The second digit
--
***
"F" key in the
main unit
___
"F" key in the main unit
through F . However, the setting value of RF side gain
H H
The third digit
___
***