Account Page Definations - Grandstream Networks GXP1610 Administration Manual

IP Geographic
Information
System Time
System Status
Core Dump

ACCOUNT PAGE DEFINATIONS

The GXP1610/ GXP 1620/GXP1625 has two lines that can be configured to accommodate independent
SIP accounts. Every SIP account has an individual configuration page.
Account x -> General Settings
Account Active
Account Name
SIP Server
Secondary SIP Server
Outbound Proxy
SIP User ID
SIP Authentication ID
SIP Authentication
Password
Name
Voice Mail UserID
Account x -> Network Settings
DNS Mode
Firmware Version 1.0.0.35
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
 City. Displays the city name.
 Language. Displays current language been used.
 Timezone. Displays current time zone.
 System up time. Displays system up time since the last reboot.
 System time. Displays current system time on the phone system.
GUI and Phone service status.
Core dump file that could be downloaded for troubleshooting purpose.
This field indicates whether the account is active. The default setting is "Yes".
The name associated with each account to be displayed on the LCD.
The URL or IP address, and port of the S IP server. This is provided by your
VoIP service provider (ITSP).
The URL or IP address, and port of the SIP server. This will be used when the
primary SIP server fails.
IP address or Domain name of the Primary Outbound Proxy, Media Gateway,
or Session Border Controller. It's used by the phone for Firewall or NAT
penetration in different network environments. If a symmetric NAT is detected,
STUN will not work and ONLY an Outbound Proxy can provide a solution.
User account information, provided by your VoIP service provider (ITSP). It's
usually in the form of digits similar to phone number or actually a phone
number.
SIP service subscriber's Authenticate ID used for authentication. It can be
identical to or different from the SIP User ID.
The account password required for the phone to authenticate with the ITSP
(SIP) server before the account can be registered. After it is saved, this will
appear as hidden for security purpose.
The S IP server subscriber's name (optional) that will be used for Caller ID
display.
This parameter allows you to access voice messages by pressing the
MESSAGE button on the phone. This ID is usually the VM portal access
number. For example, in Asterisk server, 8500 could be used.
This parameter cont rols how the Search Appliance looks up IP addresses for
hostnames. There are four modes: A Record, SRV, NA TP TR/SRV, Use
Configured IP. The default setting is "A Record". If the user wishes to locate
the server by DNS S RV, the user may select "SRV" or " NA TP TR/SRV". If
"Use Configured IP" is selected, please fill in the three fields below:
 Primary IP: The primary IP address where the phone sends DNS query
to;
 Backup IP 1;
Backup IP 2.

GXP1610/GXP1620/GXP1625
Administration Guide
Page 20 of 45