To Turn Off Displayed Data; To Change Displayed Overlay Data Size - Lowrance X96 Installation And Operation Instructions Manual

Data list showing Water Distance selected for display on Sonar Page.
3. To return to the previous page, press

To turn off displayed data:

1. Press
MENU
2. Press ↓ or ↑ to select Data Type|
disappears from the top of the list. (If you wish, you may now use ↓ or ↑
to select other Data Types to turn off.)
2. To return to the previous page, press

To change displayed overlay data size:

1. Press
MENU
2. Press ↓ or ↑ to select Data Type|
. Use the ↑ ↓ keys to select the desired overlay size and press
press
ENT
| |
ENT EXIT EXIT.
The selected data type will be displayed in the new size. (To change the
font size for another Data Type, repeat these steps, beginning with step
two above.)
Tip:
If you wish, you can change the size of displayed overlay data when
selecting a data type:
1. Press
MENU
2. Press ↓ or ↑ to select Data Type|
switch the data to the desired size. Press
main display.
NOTE:
Some data types can be displayed in only one font size. If that is the
case, the Data Size box will not be displayed for that data type.
|↓ to
O
VERLAY
|↓ to
O
VERLAY
|↓ to
O
VERLAY
EXIT
| .
D ENT
ATA
ENT
EXIT
| .
D ENT
ATA
ENT
| .
D ENT
ATA
54
| .
EXIT
| The selected data type
ENT.
.
↓
. Press to Overlay Size and
, then press → or ← to
ENT
|
EXIT EXIT
to return to the