Fish Alarm; To Turn On The Fish Alarm; Brightness - Lowrance X96 Installation And Operation Instructions Manual

Notice the size of the black alarm bar on the right side of the screen
changes as you manipulate the ↑ ↓ keys.
4. To set the lower boundary for the Zone Alarm, use ← or→ to select
, then press ↑ or ↓ to move the bottom of the bar to the desired
L
OWER
depth. Notice size of the black alarm bar on the right side of the screen
changes as you manipulate the ↑ ↓ keys.
5. Press
EXIT
fish, bottom or structure — within the zone alarm's depth range will
trigger the zone alarm.
6. To turn
| |
E ENT
NABLED
To switch to a different depth setting, open the Sonar Alarms menu and
repeat the instructions in steps 3 and 4 above.

Fish Alarm

Use the fish alarm for a distinctive audible alarm when fish or other
suspended objects are detected by the Fish I.D. feature (Fish I.D.
must be turned on for the Fish Alarm to work). A different tone sounds
for each fish symbol size shown on the display.
Sonar Alarms menu with Fish Alarm selected. The check box to the left

To turn on the fish alarm:

1. Press
A
LARM
2. Press ↓ to
F
3. To turn off the alarm, press

Brightness

See the entry in this section for Screen Contrast and Brightness.
|← to
Z A
ONE
off the alarm,
.
EXIT
is blank, indicating the alarm is turned off.
.
|
A ENT
ISH LARM
|
E
LARM NABLED
press
| .
EXIT
|↓ to
A
LARM
42
| . Now, any echo —
ENT EXIT
|↓ to
A
LARM
|
F A ENT
ISH LARM
Z A
ONE LARM
| .
EXIT