Removing the Power-Adapter
Port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the
2
Remove the battery.
3
Remove the
4
Follow the procedure from step 1 to step 12 in "Removing the
Board".
Procedure
1
Remove the screw that secures the power-adapter port to the palm-rest
assembly.
2
Note the power-adapter port cable routing and remove the cable from
the routing guide on the palm-rest assembly.
68
base
cover.
wireless
card.
Computer. After working inside your
After Working Inside Your
System