Replacing The Wireless Card; Procedure; Post-Requisites - Dell XPS 13 Service Manual

Replacing the Wireless Card

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the notches on the wireless card with the tabs in the wireless-card
slot.
CAUTION: To avoid damage to the wireless card, never place
cables under the wireless card.
2 Slide the wireless-card at an angle into the wireless-card slot.
3 Connect the antenna cables to the wireless card.
The following table provides the antenna cable color schemes for the
wireless card supported by your computer.
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
4 Press the other end of the wireless card down.
5 Place the wireless-card bracket on the wireless card.
6 Replace the screw that secures the wireless-card bracket to the system
board.

Post-requisites

1 Replace the battery.
2 Replace the base
Computer. After working inside your
cover.
After Working Inside Your
Antenna-cable color
White
Black
25