Replacing The Battery-Status Light Cable; Procedure; Post-Requisites - Dell XPS 13 Service Manual

Replacing the Battery-Status
Light Cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Adhere the battery-status light cable to the palm-rest assembly.
2 Route the battery-status light cable and adhere it to the palm-rest
assembly.
3 Slide the battery-status light cable into the battery-status light cable
connector and press down on the latch to secure the cable.
4 Adhere the tape that secures the battery-status light cable to the
keyboard-controls board.

Post-requisites

1 Replace the battery.
2 Replace the base
Computer. After working inside your
cover.
After Working Inside Your
37