Replacing The Touch Pad; Procedure; Post-Requisites - Dell XPS 13 Service Manual

Replacing the Touch Pad

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the touch pad with the screw holes on the
palm-rest assembly.
2 Replace the screws that secure the touch pad to the palm-rest assembly.
3 Slide the touch-pad cable into the system board and press down on the
latch to secure the cable.
4 Route the touch-pad cable and adhere the cable to the palm-rest
assembly and keyboard.

Post-requisites

1 Replace the battery.
2 Replace the base cover.
Computer. After working inside your
After Working Inside Your
41