Configuring The Hub; Network Configuration; Date And Time Configuration - AMX endeleo UDM 1604 User Manual

1.3

Configuring the Hub

Each Hub can be configured for the correct network environment. It is
also possible to configure each Hub for the correct date and time.
1.3.1

Network configuration

Hubs can be configured for the network environment using the Setup
page.
(1)
(2)
(3)
1.3.2

Date and Time configuration

The Setup page is also used to set up the hub date and time, which is
used for scheduling.
(1)
(2)
1-2
UDM1604-USG – 2.0 - 0606
Click on the Setup option to the left of the screen.
The following Hub options should be configured from
this page:
a) Hub IP Address, Subnet Mask and Default
Gateway;
b) UDP Port (default is 2008) and
c) Hub name (maximum of 30 characters).
Figure 1-3: The Setup Page
Once the network environment has been configured
click on Update.
Note!
All changes are immediate - once the IP address of
the hub has been changed redirect the web browser
to the changed address.
To configure the Hub's Date and Time, ensure the
Setup page is displayed.
Configure the Hub by typing in the correct values for
the Time and Date.
Chapter 1
Hub configuration