Udm-0102 1X2 Multi-Format Distribution Hub; Overview; Common Application; Features - AMX UDM-0102 Instruction Manual

UDM-0102 1x2 Multi-Format Distribution Hub

Overview

The UDM-0102 1x2 Multi-Format Distribution Hub (FG-UDM-0102) is designed for smaller installations with long video/audio
cable runs. It supports two high-resolution input ports and one UDM output port, making it an ideal solution for distributing
audio/video content to a classroom, conference room or other presentation room.
FIG. 5
UDM-0102 (front view)
The UDM-0102 delivers media over easily-installed, dedicated Cat5/5e/6, which de-couples distribution of the media from
the corporate backbone. Users can quickly switch and transmit any video source to any display device, power on/off
display devices, and permission user control to select and play video sources and media servers on demand.
The UDM-0102 supports any combination of the following: two RGBHV sources, two Component video sources, two S-
Video sources or six Composite video sources. Supported source inputs to the UDM include standard VGA, Composite,
Component or S-Video feed, and output is presented as an RJ45 port for connection to Cat5/5e/6 twisted-pair Ethernet
cable. Video inputs are connected via the HD15 VIDEO IN Input connectors on the rear of the UDM. Adapters are used to
bring the different types of video source into the UDM.
To use Component or Composite input, you will need the UDM-HD15RCA3F HD-15 to 3x RCA Breakout Cable

(FG-HD15RCA3F, not included).
To use SVideo input, you will need the UDM-SVID01 HD-15 to S-Video Cable Breakout Cable (FG-UDM-SVID01, not

included).
Each UDM has an Ethernet network port to provide connectivity to a central management system, or can be controlled
by the onboard configuration pages. A Serial connection is also provided for CLI administration and diagnostic purposes.
The UDM-0102 can deliver all content and control up to 2,300 feet. See the Audio & Video Formats/Resolutions/
Distance section on page 8 for tested and confirmed distances.

Common Application

Ideal for distributing audio/video content to classrooms, conference rooms or other presentation rooms.

Features

2 multi-format inputs x 1 RJ-45 output

Digital audio support

Central device control

Switched manually, centrally (browser) and/or via remote control


Compatibility

The UDM-0102 is compatible for use with UDM-RX02 (FG-UDM-RX02) Multi-Format Receivers. See the UDM-RX02 Multi-
Format Receiver section on page 18 for details.

Product Specifications

UDM-0102 Specifications
Power Requirements:
Front Panel Components
Ethernet (RJ-45) port:
Serial (RJ-12) port (labeled "10101"):
UDM-0102 & UDM-RX02 Instruction Manual
24VDC @ 1.25A
Provides 10 BaseT network connectivity
Enables an administrator to control the UDM-0102 from a command line prompt and terminal
connection. Requires a DB9-to-RJ12 adapter cable (FG-RS01) to connect to a PC.
UDM-0102 1x2 Multi-Format Distribution Hub
10