Creating And Saving A Trail - Lowrance GlobalMap 5500C Operation Instructions Manual

Navigate to a Point of Interest
For POIs that are in view on the map, you can easily use the Navigate
to Cursor command above. Just use the cursor to select the POI.
The other method involves searching for POIs with the Find Waypoint
command, launched with the
lier in this section, or turn to Sec. 6, Searching, for detailed instructions
on POI searches.)
After you have looked up an item with the Find Waypoint command,
→
use the to make sure the
the screen, then press
information to the item.
To cancel navigation, press
to | . The unit stops showing navigation information.
Y ENT
ES

Creating and Saving a Trail

A trail, or plot trail, is a string of position points plotted by the Global-
Map as you travel. It's a travel history, a record of the path you have
taken. Trails are useful for repeating a journey along the same track.
They are particularly handy when you are trying to retrace your trip
and go back the way you came. On the screen, trails are represented by
a solid line extending from the back of the current position arrow.
The GlobalMap is set at the factory to automatically create and record
a trail while the unit is turned on. The unit will continue recording the
trail until the length reaches the maximum trail point setting (default
is 2,000, but the unit can record trails 9,999 points long). When the
point limit is reached, the unit begins recording the trail over itself.
By default, the trail flashes once a second, making it easier to see
against the background map. With the default auto setting, the
GlobalMap creates a trail by placing a dot (trail point) on the screen
every time you change directions. (The trail update rate and the meth-
ods used for creating a trail can be adjusted or even turned off. See Sec.
5 for Trail Options.)
To preserve a trail from point A to point B, you must "turn off" the trail
by making it inactive before heading to point C or even back to point A.
When the current trail is inactive, the GlobalMap automatically begins
recording a new trail.
To Save a Trail
1. Press
MENU
↓
2. Press to the Saved Trail List|
. The GlobalMap begins showing navigation
ENT
↓
| | to
MENU M
key. (See the searching example ear-
WPT
command is highlighted at the top of
G T
O O
| |
MENU MENU
| .
T ENT
Y RAILS
.
ENT
47
↓
to
C N
ANCEL AVIGATION
←
| |
ENT