Lowrance GlobalMap 5500C Operation Instructions Manual page 60

The Transfer My Data submenu asks if you want to save data to the
MMC or load data from the MMC into the unit's memory.
2. The Transfer My Data menu includes a message that tells you if a
MMC is present or not. If no MMC is present, you must insert a card to
activate the Load or Save commands.
To transfer data from the GlobalMap to the MMC press
.)
S
AVE
To transfer data from the MMC to the GlobalMap press
| .
L ENT
OAD
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press
shown in the following figures), press
lection box. Press
the next character and repeat until the name is correct. Then, press
↓
| to
ENT S
AVE
The unit will display a completion message when the data transfer is
finished. To return to the Page view, repeatedly press
These figures (left to right) show the menu sequence for naming and sav-
ing a GPS Data File from the GlobalMap's memory to an MMC.
4. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
tion box, use
↓
to
S D
AVE
↑ ↓
or to change the first character, then press
| .
D ENT
ATA
↓ ↑
or to highlight the file, then press
| . If you wish to rename the file (as
ENT
ATA
ENT
54
to activate the file name se-
EXIT
to activate the selec-
ENT
ENT
(for
ENT
→
to
→
to
.
to accept the