Press ↓ to
U
PDATE
Trail Update Rate (Time, Distance)
You can update a trail by time, with a range from 1 second to 9999 sec-
onds; the default is 3 seconds. You can update by distance, with a range
from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10 mile.
With Update Criteria selected, press ↓ to either the rate or distance
data entry boxes and press
ter, then press → to the next character and repeat until the entry is
correct. Press
Specific Trail Options
Delete Trail
To delete a specific trail: From the Trails menu, press ↓ to trail
name|
. The Edit Trail menu appears as seen in the following fig-
ENT
ure. Press ↓ to
New Trail
To manually start a new trail or delete a trail: From the Trail Options
Menu, press → to
Trail Options menu.
|
C
ENT
RITERIA
ENT
|
to return to the Trail Options Menu.
EXIT
EXIT
Trail Options menu.
|
D
T
ELETE
RAIL
|
N
T
EW
RAIL
|press ↓ or ↑ to select criteria type|
. Press ↑ or ↓ to change the first charac-
|← to
ENT
Y
ES
. The trail menu appears as seen below:
ENT
94
|
.
ENT
.
ENT