Trail Update Rate (Time, Distance); Delete Trail - Lowrance iFINDER GO Advanced User's Manual

traveling in a straight line. Once you deviate from a straight line, the
unit "drops" a plot point (trail waypoint) onto the trail. This conserves
plot trail points. If a plot trail uses all of the available points allotted to
it, the beginning points are taken away and placed at the end of the trail.
Press ↓ to
U
PDATE

Trail Update Rate (Time, Distance)

You can update a trail by time, with a range from 1 second to 9999 sec-
onds; the default is 3 seconds. You can update by distance, with a range
from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10 mile.
With Update Criteria selected, press ↓ to either the rate or distance
data entry boxes and press
ter, then press → to the next character and repeat until the entry is
correct. Press
Specific Trail Options

Delete Trail

To delete a specific trail: From the Trails menu, press ↓ to trail
name| . The Edit Trail menu appears as seen in the following fig-
ENT
ure. Press ↓ to
Trail Options menu.
|
C ENT
RITERIA
ENT
| to return to the Trail Options Menu.
EXIT EXIT
Trail Options menu.
|
D T
ELETE RAIL
|press ↓ or ↑ to select criteria type|
. Press ↑ or ↓ to change the first charac-
|← to
ENT Y
ES
73
| .
ENT
.
ENT