Viewing Basic Information - Navien NCB-24LSWE Installation & Operation Manual

2. Press the DHW button. The DHW temperature will flash.
3. Press + (Up) or – (Down) buttons until the desired
temperature appears on the display.
You can adjust the temperature while the display is flashing.
If no buttons are pressed for 5 seconds or if the ECO button
is pressed, the current temperature setting will be stored
automatically.
Take note of the original heating temperature in
Note
●
case you want to restore it to the default.
The default space heating temperature range is
●
30°C to 65°C.
The boiler will retain your settings during a power
●
outage.
42 Operating the Boiler

9.3 Viewing Basic Information

To view information about the boiler, press the ECO button for 2
seconds.
Press the + (Up) or – (Down) buttons to switch between the
information types.
Display Description
Space heating supply water
temperature (°C)
Space heating return water
temperature (°C)
Domestic hot water outlet
temperature (°C)
Cold water inlet temperature
(°C)
Domestic hot water (DHW) flow
rate in LPM
Outdoor air temperature (°C)
(with optional Outdoor
Temperature Sensor only)